Knowing how to choose the right model Freestyle BMX bicycle is very important. That's why we'll guide you through this article.


BMX SIZE

The most important parameter is the height and age of the rider. According to this, we start choosing the right BMX size. The size of the bicycle is given in inches and it means the diameter of the wheels. The length of the frame and the height of the components are further automatically derived from the given wheel size to make the bike geometrically matched and comfortable for the rider of the given height.

12 "BMX = from 66cm to 121cm

16 "BMX = from 122cm to 138cm

18 "BMX = from 139cm to 152cm

20 "BMX = from 153cm to 184cm +

FRAME

The next point is to choose the right frame length, especially for the 20 "models, these are measured in the inches, and it is the length of the top frame tube. The 20" BMX is usually a choice from 20.0 "to 21.0". So the difference is only 2.54cm, but this detail is very busy when riding.

20 "- 20.5" = from 153cm - up to 169cm

20.5 "- 20.75" = from 170cm - to 183cm

21 "and more = 184cm +

HANDLEBARS

Item number 3 is the handlebar. They should be comfortable to ride and should have adequate height and width in relation to the heigh and age of the rider.

8.25 "= up to 165cm

8.5 "= from 165cm to 180cm

8.75 "and higher = 180cm +

OPTIMAL GEAR

Another factor is the optimal pedaling gear. Most Full BMXs are fitted with a gear ratio of 25 teeth to 9 teeth. 25 teeth have sprockets and 9 teeth have a rear hub driver wheel. This transfer suits for the most riders. However, if you want faster transmission, we recommend replacing the 25t sprocket with the 28t sprocket.

BRAKE or BRAKELESS

The rear brake is very important for beginners and we definitely do not recommend dismantling it. It helps to increase safety when riding, and also when young rider will test the first BMX tricks. Despite the fact that the brakeless is stylish and relatively trendy, the rider, which is just starting try freestyle bmx ride can be dangerous for him.

PROTECTORS and HELMET

Protectors and helmets should be an inherent part of every new rider. Freestyle BMX is one of the extreme sports that can easily be hurt. So body protection is necessary. Nowadays, helmets and protectors for BMX riders are available in all sizes. In the protective equipment of each new rider should be helmet, knee protectors and shin protectors. However, the ankle and elbow pads are very popular. Safety first !

PLACE for RIDE

We recommend for young or slightly advanced riders to ride in skate parks or bike parks. There they take the basic direction of this sport and learn how to control the BMX on the obstacles that are destined for it. Street driving in the streets prefers a large number of riders, but they also started in classic skate/bike parks, where they took their first experiences. In addition, it is much safer and easier. 

Comments (0)

No comments at this moment

New comment

You are replying to a comment

LATEST BLOG POSTS

Visit our blog

Product added to wishlist