TOTAL BMX NEW PRODUCTS ON JUNKRIDESHOP

TOTAL BMX HANGOVER H2 FRAME

The new Hangover H2 is the latest version of Alex Coleborn’s signature frame that has been a best seller over the last few years. We made some small changes, some visible and some internal which will make a big difference to the performance and strength of the frame. Its a finely tuned beast.

New on the H2:
Integrated chain adjusters. Rear length slightly shortened by a fraction to allow better chain setup Tapered Down tube 36mm taper to 32mm to create an even stronger headtube junction internally strengthened with thicker tubing in key stress areas, extra short option 19.8” Top tube length added, extra width for up to 2.4” tyre.

Spec:

• FULL Japanese 4130 Chromoly (best available)

• 75 Degree head angle

• 71 Degree eat tube angle

• Stand over 7.3” (centre of BB-centre of TT)

• 12.93”-13.2” rear end length

• 33mm Top tube, Integrated seat clamp

• Tapered 36mm to 32mm down tube

• Internally offset thicker tubing thickness in key stress areas

• Tapered rear chain stays 19mm - 16mm

• Tapered seat stays 19mm - 14mm

• Tapered seat tube

• Headtube: integrated heat treated

• BB: mid heat treated 11.5” height

• Removable brake mounts and tabs all included

• Dropouts: 6mm thick Heat treated with integrated chain adjusters

• Sizes: 19.8”/ 20.4”/ 20.6”/ 21” top tube lengths

• (1) Year Warranty

TOTAL BMX TWS FRAME

Mark really wanted to liven up his signature frame so he renamed it and completely shook up the geometry, in his words the TWS frame is the Voltron perfected.

Spec:

• Full Multi Butted Sanko 4130 Chromoly
• Head Tube Angle: 75.5º
• Seat Tube Angle: 71º
• Standover Height: 8.75” (centre of BB to centre of TT)
• Rear End Length: 13.2” - 13.4”
• Top Tube: 32mmø Multi butted
• Down tube tapered 36mmø to 32mm, butted with offset thickness in key areas
• Tapered chain stays 19mm-16mm
• Tapered seat stays 19mm-14mm
• BB Height: 11.5”, low and good for stability
• Tapered seat tube with power clamp
• Headtube: Integrated and heat treated
• Removable brake mounts and tabs all included (other brands charge extra)
• Dropouts: 6mm thick heat treated with integrated chain adjusters
• Sizes: 20.3”, 20.6”, 21”, 21.25” top tube lengths
• Colours: Black Gloss, Copper Metallic, Ruckerz Delight
• Weight: 2.25kg - 4.9lbs (4lbs, 15oz for the 20.6” size)
• Warranty: 1 Year

TOTAL BMX KILLABEE K2 FRAME

Rear end- Shorter 12.75” slammed length, Dropout internal faces CNC machined with Integrated chain tensioners.
BB height- Slightly lower to increase stability. 
Downtube tapered to increase headtube junction strength
Standover. Increased but with the lower BB height the seat will be the same height so it will ride the same as the K1 for seat position but it will appear a little taller to the eye. Sizes- Extra short 19.75” length added making it one of if not the shortest wheel base for a regular sized BMX, great option for the smaller rider or a rider making the jump from 18”.

Overall the refinements on the K2 take the frame to the next level for the feel and strength of the frame. 

Spec:

• Head angle: 75.5 Degrees

• Stand over height 7.63″ (measured from centre of BB - centre of top tube)

• Mid BB 11.62″ height (heat treated)

• Rear length 12.75″ slammed-13.1″ (short and responsive)

• Tapered Downtube / seat tube / seat stays / chain stays

• Offset tubing thickness, thicker in the areas of high stress

• Integrated Head tube (Heat Treated)

• Removable brake lugs and tabs

• 6mm thick Heat treated dropouts with internal face CNC detail and integrated chain tensioners

• Laser cut stay bridge with Total Logo

• Highest quality materials used throughout

• TT lengths 19.75/ 20.4/ 20.7/ 21″

• (1) years warranty (Check website for full details)

TOTAL BMX TWS FORK

The TWS fork has all the top features you would expect from a Pro level fork, multi butted heat treated 4130 chromoly tubing, 7075 T6 Alloy pre load top bolt and more.

• Heat Treated multi butted tubing (4130 Chromoly)
• 28mm Offset
• Super slim tapered legs
• One piece CNC steerer tube (165mm length)
• Integrated bearing race
• CNC machining to inside face of dropouts to reduce weight
• Peg clearance cut outs to fork legs
• 7075 Alloy pre load bolt with both 6/ 8mm hex allen key fitment
• Colours: Black Gloss, Chrome, RuckerZ Delight
• Fork Weight: 862gms / 31.2oz
• Top Bolt Weight: 24gms

TOTAL BMX KILLABEE K2 BARS

Kyle wanted a bar with a little more upsweep, he feels it creates less impact on the wrists and prefers this feel, made from multi butted heat treated Chromoly these bars will take good care of you and ride like a dream.

Specification: 

• Backsweep: 11º
• Upsweep: 3º
• Heat Treated multi butted tubing (4130 Chromoly)
• Sizes: 9” x 29”/ 9.25” x 30”
• Colours: Black, Chrome
• Weight: Tbc

TOTAL BMX TWS BARS

The new TWS bars feature multi butted tubing with a lot of care in keeping the stem clamp area and all the joins ultra strong, built right not light!

 Specification:

• Backsweep: 12º
• Upsweep: 2º
• Heat Treated multi butted tubing (4130 Chromoly)
• Sizes: 9” x 29” / 9.5” x 29.5”
• Colours: Black Gloss, Chrome
• Weight: 845gms (9” bar)

TOTAL BMX HANGOVER H2 CRANKS

The Hangover crank has had a complete makeover, the H2 versions are lighter and stronger than the previous model. Alex Coleborn along with Mark Webb, Kyle Baldock, James Jones and Brock Horneman have been testing these for a long time and the feedback from them has been incredible!

 Specification:

• • 22mm Butted axle size, 48 splines
  • 7075 T6 light weight alloy arm retaining bolts (6 & 8mm hex allen key options)
  • Twin sprocket bolt holes for multiple sprocket fitment choices
  • Anti dent profile
  • Hangover Logo stamped into arm
  • Grease capsule included
  • Fitment tool included ( Do NOT use the alloy bolts to fit the arms)
  • RHD / LHD compatibility
  • Size: 165mm, 170mm 175mm
  • Colours: Black, Chrome
  • Weight: 777gms (Arms and Axle) 28gms (Bolts)

TOTAL BMX SPITFIRE RIM

The Spitfire rim bridges the gap between crazy narrow rims that don't work with modern wider tyre sizes and the ultra wide rims that are very heavy. Tyres will sit on these rims securely, the rim is strong and light enough to keep you flying.

Specification: 

• 6066 T6 Alloy (stronger than standard 6061 generally used on rims)
• 36 holes
• 34mm wide x 16mm high
• Corrugated profile with twin wall double box and ridge beam design
• Increased thickness around spoke holes to prevent pulling through of spoke nipples
• Cross lace design (Important to note on the build)
• Welded join
• ERD- 394mm
• Includes rim tape
• Colours: Black, Anodised Silver
• Weight: 469gms (without rim tape)
• Always use Plastic tyre levers to fit tyres, this will prevent damage to the rim edge

TOTAL BMX TWS COMBO SEAT 

Specification:

• Size: Mid seat
• Stitched in TWS Logo
• Colour: 3-panel camo cover
• Weight: 299gms

TOTAL BMX VICTORY SPROCKET 

• CNC high quality machined sprocket
• 7075 T6 Alloy, 6mm thick
• Colours: Black & Silver, Silver
• Weight: 25t (63gms), 28t (78gms)

TOTAL BMX ROTARY SPROCKET

• Super light concave design
• 7075 T6 Alloy, 6mm thick
• Colours: Black, Silver, Rainbow, Purple
• Weight: 23t (58gms) / 25t (68gms)

All new TOTAL BMX component now you can find here JUNKRIDE SHOP TOTAL BMX !!!